PC Modding

A while ago I was messing around with some unused watercooling parts and decided to build a poor man's Koolance Exos. One the one hand, it cost me less than $5 to build (since I had the watercooling parts handy) so the "poor man" bit was correct, but as far as performing like the Exos, Heh heh heh..

	The $5 reservoir. Made from a plastic jar from Tap Plastic, two 1/2" OD PVC barbs with threads for two PVC nuts. Add some silicone sealant and let dry.
	The radiator.
	View from the side. I took out the elbow joints because they restrict flow. I originally had placed them to avoid kinking, but when I get this hardware (or something like it) into a rig, I'll probably use some Swiftech coolsleeves to prevent kinking instead.
	The ad-hoc setup.
	The poor-man's Exos in operation. What a waste. Heh.